Blue Sharp Model Inflatable Slide Bouncer With Logo Printing 6*5*3.7 M

Kids Blue Sharp Model Inflatable Slide Bouncer Jumping Castle For Rental

Descriptions:

1,the step for kids get inside the airplane, it’s a long corridor for kids jumping, chasing in the castle.

2, 2 blower tubes for  inflating, and release the air if turn off the blowers, 2.1m long openings with zipper and covers , these are fast deflating sets.  About 1-2mins to inflate and within 1minute to deflate it.

3, Many D rings around the bottom and top as anchors with rope to tie a weigh, in case of strong wind to blow it away

4, Kids most attractive outdoor toys, as show in the pictures

5, Reinforced joins, double stitches at all the joins.

Quick details:

Installation

1. Place the equipment on the flat ground, it is best to put a pad of cloth (such as felt, plastic ribbon cloth) under the equipment, and then expand it.

2.Find the air inlet of the equipment, then connect with the fan outlet, and fasten the fan port, and then fasten the spare air inlet with rope.

3. Turn on the blower and the equipment will be bulging in 5 / 10 minutes.

Collection The product

1. Cut off the power supply, turn on the fan interface and exhaust port, the exhaust time is generally 10 ≤ 25 minutes, the remaining gas should be squeezed. If the equipment enters water because of rainy days,Be sure to drain the water and dry it.

2.To do cleaning treatment, you can use washing powder to wipe off its stains, oil stains, and then scrub clean with clean water, sun drying can be.
3. Fold the equipment, block the front with the bottom, and cover it with a tarpaulin.
4. If you don't need it for a long time, fold, tie and wrap the clean equipment. The storage temperature is generally-50 ≤ 40 degrees Celsius.

5.Air blower should pay attention to moisture proof and corrosion prevention. Gas model equipment should pay attention to prevent rat worm bite.

1. Customized: the size and color can be customized and the customers can use their logo or slogan on the tent.

2. Metal rings for fixation.Each product will be equipped with thick D rings to be fixed on the ground and remain steady

3. Printing Technology:We could print anything which you want,very clear and lively.Because we use the best quality printing machine,it print very quickly and in good quality.

4. Warning and Logo.No matter use our logo or your logo is all ok,we will paste them on the inflatables,if you have specific demand about the position for the logo,please let us know.

5. Professional Blowers/ pump:(1)CE blower for Europe,220-240V,50HZ(2)UL blower for America,110V,60H

6. Strong packageGenerally,the package is: PVC bag outside so that it is strong enough,if you have speicic demand about it,please tell us,thanks

Proudct Display