Outdoor Duck Shape Giant Inflatable Blow Up Water Slide For Kids And Adults

Outdoor Duck Shape Giant Inflatable Water Slide For Kids And Adults

Descripsion:

 Quick Detail:

1. This duck water slide consist of 5 parts, 1st part duck and frame, 2nd big slide, 3rd big swimming pool, 4th small slide, 5th small swimming pool.

2. Its material is 0.45mm-0.9 mm PVC Tarpauline from Plato factory which is not easy to tear off. The duck is inflatable products and need to be inflated by blower constantly, Its material is 0.35mm PVC Tarpauline. The frame is also inflataed by blower constantly, its material is 0.55mm PVC Tarpauline. The big and small slide is also with inflatable system by blower constantly,its material is 0.55mm PVC Tarpauline. The big and small swimming pool is airtight products and need to be inflated by air pump only one time, Its material is 0.9mm PVC Tarpauline.

3. The dimension of each part is different. The whole set duck water slide size is L44.5*W20*H12m. The duck hight is 2-3m, the frame is 12*12*20m, the big slide is 27*10*12m, the big swimming pool is 12m diameter, the small silde is 0.42*0.245m, the small swimming pool is 0.35*0.3m.

4. This whole set duck water slide need 6pcs 1500W air blower and 2pcs 1200W air pump together to inflate. It takes about 20-30mins to inflate whole set.

5. This duck water slide total is about 2400kg not including blower and pump, about 8.5cbm not including blower and pump. It will ship to your hand by sea. Price for whole set duck water slide is USD29800 including blower, pump, logo and shiping cost to your country port. We can design any logo for you.

How to order:

1.Confirm all your demands, we make PI for your confirmation;
2.You pay 50% of total price as a deposit to get order started.
3.We give you detailed 3D designs,and begin to produce after we confirm everything with you;
4.We will test for 4-24hours and take photoes for your confirmation, then put it away into bags,we will make the modification during testing;
5.When the order is confirmed, you pay the balance, then we arrange the shipment.

Techniques:

1) Double stitching inside and outside;

2) Quadruple stitching for the stress-bearing parts and the joint parts;

3) Nylon/pvc tarpaulin webbing reinforces for some parts;

4) Full-digital printing protected by a liquid protection film;

5) Enough zipper outlets to deflate the games quickly;

6) Reinforcements for zipper joints; zipper cover with to disperse the stress for zipper;

7) Enough anchor/D-rings to keep stability and safety under use.

Picture