Red Clear PVC / TPU Adults Blow Up Water Walk On Toy With Durable PVC Tarpaulin Ends

 
Red Clear PVC / TPU Adults Blow Up Water Walk On Toy With Durable PVC Tarpaulin Ends
 
 
Specifications:
 

 
 
More Details:
 
Most rollers are airtight only with 2 small entrances, a little inconvenient for adults, especially for those big guys. But this one, enough room for adults entering and moving. Besides, it is shaped by colorful D-rings inside, has a good and attractive appearance.
 
About our  water roller,any color and size are available. Here below are some regular sizes just for your reference: 2.8*2.4m ,2.4*2.2m,2.2*2m,2m*1.8m,2.6m*2.2m.
 
Normally, most clients would buy several pieces at a time. Meantime, they also will buy some water balls and bumper boats .Then you can put them together if you have a pool, as well can deliver them by sea. If you don't have a pool, you can also buy a inflatable pool.
 
 
Advantages:
 
1. Reliable and durable Material
Top quality material are always applied on our inflatables, and all of them are from one of the best material suppliers in China - Plato chemical; All of the materials we are applying meet ROHS , EN14960 , CE , UL.
2.Not only do we focus on our products quality themselves, but also we pay attention to other details like packing. Based on our years experience, we always provide our customers the best packing like: Use heavy-duty 0.65mm PVC Tarpaulin carry bag to pack Inflatables and Exported standard cartons for Air pump and repair kit.
3.we have stricly quality control procedure and good after-service, the details are as follows:
a.We test each product for 3 days to ensure the toys seamed exactly well.
b.We provide repair kit for free,which including material and glue for repairing in case.
c.We will guide you to repair the roller and make compensation for them accordingly.
d.7 x 24 hours online service , any questions will be promot response.
3. Our harness inside the roller is very flexible and you can adjust it to proper position quickly.
4. Imported miller welding machine which has stable welding temperature, so our products will not be overwelded or misswelded to ensure the products stable and durable.
 
 
Repair Guidance:
 
1. Find out exactly where the leak is. Fill a spray bottle with a mixture of soap and water and spray it liberally on the water roller along the seams. You will notice that the solution starts to bubble up where the leak is located, so take note of the position of the hole.
2. Prepare the hole for patching. Dry the seam off, and make sure that it is completely deflated before attempting to patch the seam. If you have the patch kit that came with the roller, you can use the prep solution to thoroughly clean the rubber before proceeding. Rubbing alcohol also works.
3. Apply glue to the seam and let it dry for about 15minutes. If possible, apply some glue to the inside of the seam as well, so that it spreads out and gives an extra layer of protection when the water roller pressurizes.
4. Fill the water roller about halfway with air and wait another 30 minutes or so to make sure that the glue has dried completely.
5. Inflate the item completely and spray it again with the soap and water mixture to make sure that the hole is indeed fixed.